Control Rate and Audio Rate

Like many other audio programming environments, PD makes a difference between control signals and audio signals. They run at different rates and can not be combined, unless converted. Audio operations require the DSP to be activated, whereas control rate signal work at any time. Objects define whether an outlet gets or outputs control or audio rate signals. Objects with audio inputs or outputs are usually named with a ~. Control rate connections are thinner than audio rate signals. The example rates.pd simply shows an audio and a control rate connection:

/images/basics/pd-rates.png

Audio to Control

Converting audio signals to control rate signals can be achieved with the snapshot~ object, as done in the example audio-to-control.pd. A possible application is an envelope follower. This object needs to be triggered to grab a snapshot, which is done with a metro object at 100 Hz in this example. The output is a level indicator for the LFO at 0.1 Hz:

/images/basics/pd-audio-to-control.png

Control to Audio

Usually, control signals can be connected to audio inlets. The conversion shown in the example audio-to-control.pd is thus less frequent. However, in some cases it might be necessary to convert control signals to audio rate. This is done with the sig~ object:

/images/basics/pd-control-to-audio.png


Contents © Henrik von Coler 2021 - Contact